Allnode Plus — Every Digital Mode. One Box. Any Radio.

AllStar, EchoLink, DMR (BrandMeister + TGIF), YSF, NXDN, P25, and M17 — all from an FM HT you already own. FREE SHIPPING!

Stop buying a separate radio for every mode. Stop stacking hotspots on your desk. Allnode replaces $1,000+ of DMR radios, fusion handhelds, and single-purpose hotspots with one American-designed device and the analog HT you already own.

👉 Order Your Allnode Plus — only $350

📟 The OLED display — nobody else has one

Every other AllStar node in America ships as a blind black box. Plug it in, then go dig through your router's DHCP table trying to figure out what IP address it grabbed.

Allnode has a screen. The only AllStar product in the US that does.

At a glance, without touching a computer, you see:

• ✅ Your node's IP address — no router hunting, no network scanning, no guessing
• ✅ Your callsign and node number
• ✅ Current connections — who you're linked to, right now
• ✅ Live station status

It sounds like a small thing until the first time you move the node to a different network, or hand one to a club member, or need to get into the web interface in ten seconds instead of ten minutes. Then it's the feature you can't believe everyone else skipped.

🎙️ NEW: Listen and talk to your Allnode with your phone or computer!

Open a browser on your phone, tablet, or laptop and you get full transmit and receive on AllStar, EchoLink, DMR BrandMeister, DMR TGIF, YSF, NXDN, P25, D-STAR, and M17 — using that device's microphone and speaker. Your node stays right where it is, in the shack. No app to install. No dongle. Nothing extra to buy.

Want to listen to your node without using the radio? This is the perfect solution for you, and no other Allstar product competes!

The radio isn't going anywhere. This just means being away from it doesn't have to mean being off the air.

The math is brutal (for everyone else)

One purchase. One web page. Every network.

Built right, not built cheap

Raspberry Pi 5 inside. The fastest Pi ever made — not the recycled Pi 3 boards competitors are still shipping. Smooth audio, instant web interface, zero lag.

Automatically schedule your connections. You won't ever forget to tune into a certain net or get booted off someone's reboot Allstar node again!

Custom Allnode SA818/CM108B board. Designed, built, and tested in the USA specifically for this device. Not a generic import board.

In-house digital bridging. We wrote our own bridging software for our own hardware. The audio is noticeably cleaner than DVSwitch and the other conversion tools everyone else repackages — because we're not repackaging anything.

AllStarLink 3. The newest, best AllStar release, preinstalled and preconfigured.

Runs cool, runs forever. Oversized heatsink in a heavy-duty vented plastic case. Plastic on purpose — metal cases choke your WiFi. Rubber feet keep it planted on the desk.

Ethernet or WiFi. Plug it in or go wireless. Both work out of the box.

Wide UHF coverage. Pick a frequency that works for your shack.

No SSH. No config files. No wondering if it'll work.

Most nodes hand you a Linux box and wish you luck. Allnode hands you a unified web page.

Open your browser and you can:

• ✅ Configure AllStar, EchoLink, and every digital mode setting
• ✅ Enter your WiFi credentials in seconds
• ✅ Connect and disconnect from AllStar, EchoLink, DMR BM, DMR TGIF, YSF, NXDN, P25, D-STAR, and M17 — individually, no messy network bridging required
• ✅ Save your favorite talkgroups, reflectors, and nodes for one-click access
• ✅ Get on the air from the browser itself when you're away from your radio
• ✅ Change frequency, CTCSS tone, and more
• ✅ Reboot or power down safely
• ✅ Update your software with one click
• ✅ Check status and IP address at a glance

...and a lot more.

If you can use a web browser, you can run an Allnode.

90 Days of Free Priority Support — From the Guy Who Built It

You're not filing a ticket into a void. Every Allnode includes 90 days of free, direct support from us. Break something? Stuck on a config? Just want to talk through what's possible? We'll get you on the air.

And most support requests after 90 days stay free, too.

📧 support@k0nnk.com — real answers from a real ham.

Ready to clear off your desk?

👉 Order Your Allnode Plus — $350

Designed, assembled, and supported in the USA.